Renault Workshop Repair Manual Technical Note 3736A

USING THE MANUAL
There are two main sections in this manual:
– technical specifications,
– overhauling the engine.
For repairing vehicle components, refer to the Workshop Repair Manual and Technical Notes for the vehicle.

UNITS OF MEASUREMENT
– All dimensions are given in millimetres (mm) (unless stated otherwise).
– Tightening torques are expressed in decaNewtonmetres (daNm). Reminder: 1 daNm = 1.02 m.kg.
– Pressures in bar Reminder: 1 bar = 100,000 Pa.

OPERATION
The “Common Rail” high pressure direct injection system is a sequential diesel fuel injection system (based on the petrol engine multipoint injection system).

This new injection system reduces operating noise, reduces the volume of pollutant gases and particles and produces high engine torque at low engine speeds thanks to a pre-injection process.

The low pressure pump (also called the booster pump) supplies the high pressure pump via the pressure regulator filter then the fuel filter during the starting phase only, at a pressure of between 2 and 4 bar.

(Read More on Free Ebook at PDF Format)

Download Renault Workshop Repair Manual Technical Note 3736A.pdf

Advertisement