ARR21900 61-67 Buick Riviera & 61-65 LeSabre, Invicta

1. Raise and support vehicle at a safe and comfortable working height.
2. Support the axle then remove the coil spring and shock. Refer to service manual for proper disassembly procedure. The studs in the upper coil spring mount must be removed. To help keep the axle in place, do one side at a time.
3. Apply thread sealant to a straight air fitting and screw it into the top of the air spring.
4. Place the upper cup (tall) on top of the air spring and fasten with two 3/8” Nyloc nuts and flat washers. Thread the 8” stud into the nut in the bottom of the cup. The upper cup cap (short) will sit on top with the flat plate on top. The airline must be routed at this time. The assembly will be secured to the upper coil spring mount with the large washer and a7/16” Nyloc nut and flat washer as shown in the picture.
5. Place the lower air spring plate on top of the lower arm. Raise the axle up to the air spring and fasten with a 3/8” x 1” bolt, lock washer and flat washer.
6. Install the new shock absorbers.
7. Ride height on this air spring is approximately 5” tall. This may vary to driver preference.

(Read More on Free Ebook at PDF Format)

Download ARR21900 61-67 Buick Riviera & 61-65 LeSabre, Invicta.pdf

Advertisement