1997 BUICK PARK AVENUE COLLISION REPAIR ISSUES

Table of Contents

Panel Identification
Radiator Support Assembly
Upper Rail Assembly
Front Wheelhouse Assembly
Lower Rail Assembly
Door Service
Door Frame Opening
Roof Panel
Quarter Panel
Rear Rail Assembly
Rear Floor
Rear End Panel
Body Dimensions

Radiator Support Assembly
The radiator support assembly consists of twelve major components: nine upper panels, and three lower panels (figure 2-1). In addition, there are four headlight mounting brackets.

Upper Radiator Support Components
There are two service assemblies, each made up from three of the nine upper panels (figure 2-1). There are no factory welds along the rear edge of these assemblies. The rear edge of these assemblies sandwich the front edge of the wheelhouse apron. After positioning the rest of the radiator support components, check the fit using three dimensional measuring equipment. Plug weld all the panels accordingly, including the rear edge of the assemblies to the wheelhouse apron.

Lower Radiator Support Components
The lower three panels, also called the lower tie-bar, are welded to the lower rails. The three lower panels are available and serviced separately (figure 2-1).

Headlight Mounting Components
There are two mounting brackets for each headlight assembly. One mounts to the side of the wheelhouse apron and upper rail assembly. The other bracket mounts to the front upper radiator support and the top of the lower rail (figure 2-1). The service part headlight mounting holes are pre-drilled and will need to be located and shimmed
accordingly, using three dimensional measuring equipment.

(Read More on Free Ebook at PDF Format)

Download 1 9 9 7 B U I C K P A R K A V E N U E C O L L I S I O N R E P A I R I S S U E S.pdf

Advertisement