New Car and Used Car Manual Auto Car Information

Metra Installation Instructions for Part 99-7011 Applications Mitsubishi Lancer 2008

by autocar

Sponsored Links

Disconnect the negative battery terminal to prevent an accidental short circuit.

Open the glove box and remove (1) Phillips screw from the panel to the right of the glove box door. Unclip and remove the panel. (Figure A)

Remove (1) Phillips screw from the panel above the glove box then unclip and remove the panel. (Figure B)

Unclip the radio switch panel including the hazard switch assembly. Unplug hazard switch assembly and remove panel. (Figure C)

Remove (4) Phillips screws securing the radio chassis. Unplug and remove chassis.

(Read More on Free Ebook at PDF Format)

Download Metra Installation Instructions for Part 99-7011 Applications Mitsubishi Lancer 2008.pdf

Share and Enjoy:
  • Print
  • Digg
  • Sphinn
  • del.icio.us
  • Facebook
  • Mixx
  • Google Bookmarks
  • Blogplay
Advertisement





You might also like:

APPLICATIONS Hyundai Sonata 2006-2008
Disconnect the negative battery terminal to prevent an accidental short circuit. Open glove box and...
 MITSUBISHI 2008-09 Lancer Evolution X L4-2.0L Turbo Except Ralliart models
TO START: 1. Turn off the ignition and disconnect the negative battery cable. NOTE: Disconnecting the...
 APPLICATIONS Nissan Maxima 2009
1. Unclip and remove the panel below the radio. (Figure B) Disconnect the negative battery terminal to...
 Aisin Warner 450-43LE 1998 up Nissan “UD”, Isuzu “RNJ”, Mitsubishi FUSO
Vehicle speed sensor-2 is attached on the speedometer driven gear assembly. 1. Block the wheels. 2....

0 comments

There are no comments yet...

Kick things off by filling out the form below.

Leave a Comment