Aisin Warner 450-43LE 1998 up Nissan “UD”, Isuzu “RNJ”, Mitsubishi FUSO

Vehicle speed sensor-2 is attached on the speedometer driven gear assembly.
1. Block the wheels.
2. Disconnect the negative battery cable.
3. Disconnect the harness connector from vehicle speed sensor 2.
4. Connect the vehicle speed sensor connector terminal (1) to the battery (+) terminal and terminal (2) to the battery (-) terminal.
5. Connect a resistance of 1.3 k? to 1.5 k? (1.4W or more) between terminals (1) and (3).

CAUTION: Be extremely careful not to connect the battery (+) terminal to the vehicle speed sensor terminal (3). This may damage the vehicle speed sensor.

6. Rotate the shaft of the vehicle speed sensor slowly and measure the voltage at both ends with a digital voltmeter.

Measure
. The voltage, with one rotation of vehicle speed sensor shaft, fluctuates four times in the following range: 10 to 14 V ? 2V or less.

(Read More on Free Ebook at PDF Format)

Download Aisin Warner 450-43LE 1998 up Nissan “UD”, Isuzu “RNJ”, Mitsubishi FUSO.pdf

Advertisement